# Large-format CNC glass cutting for shapes, notches, and holes

CNC glass cutting up to 90" × 144". Holes, notches, cutouts, and radius corners from a DXF, DWG, or dimensioned sketch. Flat patterns have no fixture charge.

Source: https://www.temperededge.com/capabilities/cnc-cutting/

We cut on a large-format CNC table, up to 90" × 144" in one piece. Shapes, holes, notches, and cutouts come from your DXF, DWG, or a dimensioned sketch. Flat patterns do not carry a fixture charge.

The table runs float, low-iron, tinted, patterned, and satin etch from 1/8" to 1/2" (3–12 mm). Holes and notches are cut before tempering. We check the edge distance against the tempering limits before the glass is cut.

What usually comes across the table:

- **Shape cutting**: rectangles, radius corners, arches, trapezoids and freeform profiles

- **Hole drilling**: round holes, counter-sunk holes, notched cutouts for hardware

- **Repeat production**: same pattern run hundreds or thousands of times with ±1/32" consistency

- **One-offs**: single replacement lites cut from a template or the old piece

Send us your file and we'll quote the same day.

---

[Request a quote](https://www.temperededge.com/#quote)