# Glass colors Tempered Edge keeps in stock

This is the sheet kept on the rack in Chesaning. If a job needs a color or a
thickness that is not here, it is ordered in. The furnace runs up to 12 mm
(1/2"); the rack itself tops out at 6 mm (1/4"). Low-iron, reeded, fluted, rain,
glue chip, mirror, and most coatings are ordered for the job. Satin etch is a
special order.

| Code | Color | Thickness | Visible light | Status |
| --- | --- | --- | --- | --- |
| 0301 | Clear | 3 mm (1/8") | 90% | In stock |
| 0401 | Clear | 4 mm (5/32") | Confirm | In stock |
| 0501 | Clear | 5 mm (3/16") | 89% | In stock |
| 0601 | Clear | 6 mm (1/4") | 88% | In stock |
| 0302 | Green | 3 mm (1/8") | 88% | In stock |
| 0402 | Green | 4 mm (5/32") | 73% | In stock |
| 0502 | Green | 5 mm (3/16") | 78% | In stock |
| 0602 | Green | 6 mm (1/4") | 77% | In stock |
| 0303 | Light gray | 3 mm (1/8") | 60% | In stock |
| 0403 | Light gray | 4 mm (5/32") | 50% | In stock |
| 0503 | Light gray | 5 mm (3/16") | 44% | In stock |
| 0603 | Light gray | 6 mm (1/4") | 22% | In stock |
| 0305 | Dark gray (GL-20) | 3 mm (1/8") | 18% | In stock |
| 0405 | Dark gray (GL-20) | 4 mm (5/32") | 24% | In stock |
| 0605 | Dark gray (GL-20) | 6 mm (1/4") | 9% | In stock |
| 0507 | Solarcool bronze | 5 mm (3/16") | 25% | In stock |
| 0607 | Solarcool bronze | 6 mm (1/4") | Confirm | In stock |
| 0308 | Obscure | 3 mm (1/8") | 89% | In stock |
| 0509 | Satin etch | 6 mm (1/4") | 60% | Special order |

Visible light is the share of daylight that gets through the sheet, from
inventory. Where the cell says Confirm, ask before designing to a number. Six
millimeter light gray is much darker than the 3 mm sheet of the same name, and
4 mm GL-20 is listed lighter (24%) than the 3 mm sheet (18%); confirm both pairs.

## Where these colors go

- **Garage and entry doors.** Standard lite is clear; 3 mm obscure is the
  privacy lite; gray or bronze glazes a tinted door series.
- **RVs and specialty vehicles.** Factory tint is the gray or bronze the coach
  was built with. GL-20 dark gray is privacy glass over a bunk.
- **Cabs and equipment.** Gray or bronze so the operator is not looking through
  clear glass all day. Dark gray is for a panel that is not the view out.
- **On-road glass.** Side and rear tints must stay inside the transmittance for
  that location. Light gray and bronze are the stock choices.
- **Cabinets, shelves, and tops.** Mostly clear. 3 mm obscure hides the
  contents. Frosted satin and reeded are ordered. Thicker than 6 mm is ordered.
- **Sunrooms and greenhouses.** Roofs stay clear. A west wall can be gray or
  bronze from stock. Low-iron is ordered when transmission is the point.

## Made in the USA

All glass kept in stock is made in the United States, from float produced in
Michigan and Texas, cut, drilled, edged, printed, and tempered in Chesaning.
Low-iron, satin etch, reeded, fluted, rain, glue chip, mirror, most coatings,
and anything thicker than 6 mm are ordered in, so their origin can vary.
Insulated units sit outside this claim because the spacer and sealant come from
other suppliers.

Source: https://www.temperededge.com/glass/