# Glass partitions and divider panels, tempered and frit-printed

Partition glass for offices, clinics, and open offices. Full-height panels and desk screens, drilled for standoffs or sized for a channel.

Group: Furniture & cabinetry

Source: https://www.temperededge.com/industries/dividers/

## Part families

- **Full-height panels**: Tempered panels to 90" × 144" with polished exposed edges.
- **Desk-mounted screens**: Smaller panels with notches and holes for clamps and brackets.
- **Frit-banded panels**: Printed bands at eye level for visibility marking or privacy.
- **Satin privacy panels**: Satin substrate for translucent partitions in clinics and offices.

## Specifications

| Spec | Value |
| --- | --- |
| Max panel size | 90" × 144" |
| Thickness | 1/4", 5/16", 3/8", 1/2" (6–12 mm) |
| Glass types | Clear, or light gray when the glass itself is the privacy. GL-20 dark gray reads as a wall. Satin etch is ordered. A frit band marks clear glass in a walking path. |
| Edgework | Flat polish on exposed edges; seamed where channel-glazed |
| Fabrication | Standoff holes, notches, cutouts before tempering |
| Decoration | Ceramic frit bands and patterns |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |

## What we handle here

- **Ceramic frit screen printing** Borders, blackout bands, logos and legends fired into the glass during tempering. Permanent.
- **Drilling and edgework in-house** Holes, countersinks, and seamed, ground, or polished edges, finished here before the glass ships.
- **Large-format CNC cutting** Shapes, notches and radii cut from your DXF or DWG on lites up to 90" × 144".
- **Tempering under the same roof** Cut, printed and tempered in one building, so a print revision doesn't ripple through three subcontractors.

## FAQ

### Do partition panels need to be tempered?

Yes, for any panel in a walking path. Full-height glazing is a hazardous location. Every panel we ship carries a permanent temper mark.

### Can you print a visibility band?

Ceramic frit bands at any height and width, fired in during tempering. Common for code-required marking on clear panels.

### How do you handle standoff hole tolerance?

Holes are cut before tempering and held tight enough to line up with a drilled bracket pattern; send the hole schedule with edge distances.

## Related industries

- [office-furniture](https://www.temperededge.com/industries/office-furniture/index.md)
- [sneeze-guards](https://www.temperededge.com/industries/sneeze-guards/index.md)
- [interior-doors](https://www.temperededge.com/industries/interior-doors/index.md)
- [display-cabinets](https://www.temperededge.com/industries/display-cabinets/index.md)