# Fireplace door glass and hearth panels

Glass for decorative fireplace screen doors, surrounds, and hearth panels. Cut, edged, and tempered to your frame. If the opening needs high-temperature ceramic glass, we will tell you before we quote it.

Group: Industrial & equipment

Source: https://www.temperededge.com/industries/fireplace-doors/

## Part families

- **Screen door lites**: Tempered lites for decorative doors outside the direct-flame zone.
- **Hearth & floor panels**: Thicker tempered panels with polished edges for hearth extensions.
- **Surround panels**: Tinted or frit-printed panels framing a firebox opening.
- **Shaped & arched lites**: Arched tops and radius corners cut on the CNC.

## Specifications

| Spec | Value |
| --- | --- |
| Sizes | Any size to 90" × 144" |
| Thickness | 5/32"–3/8" (4–10 mm) by application |
| Glass types | Clear, bronze, or gray from stock for a screen, surround, or hearth. Low-iron is ordered. |
| Edgework | Seamed, ground or flat polish |
| Temperature limits | Tempered soda-lime glass. Not for direct flame or high-heat glazing |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |

## What we handle here

- **Drilling and edgework in-house** Holes, countersinks, and seamed, ground, or polished edges, finished here before the glass ships.
- **Large-format CNC cutting** Shapes, notches and radii cut from your DXF or DWG on lites up to 90" × 144".
- **Ceramic frit screen printing** Borders, blackout bands, logos and legends fired into the glass during tempering. Permanent.
- **Quotes in a day, parts in a week** Most quotes go out within one business day; production typically ships in 5–10.

## FAQ

### Can I use tempered glass on a wood stove?

No. Direct-flame and high-temperature glazing needs ceramic glass, which is a different material. Tempered glass is right for decorative screen doors, surrounds and hearth panels away from direct heat.

### What about a gas fireplace door?

It depends on the appliance and the clearance. Tell us the unit and where the glass sits. If tempered glass is the wrong material, we will say so before we quote it.

### Can you cut a hearth panel to fit an odd opening?

Yes, from a template or dimensioned sketch, with polished edges since the panel is exposed.

## Related industries

- [residential](https://www.temperededge.com/industries/residential/index.md)
- [residential-doors](https://www.temperededge.com/industries/residential-doors/index.md)
- [blast-cabinets](https://www.temperededge.com/industries/blast-cabinets/index.md)
- [table-tops](https://www.temperededge.com/industries/table-tops/index.md)