# Off-road and equipment cab glass

Cab glass for machines that work. Shaped lites cut on the CNC, drilled for hardware, tempered, and tinted for an operator who sits in the sun all day.

Group: Vehicle glass (DOT)

Source: https://www.temperededge.com/industries/off-road/

## Part families

- **Windshield & rear lites**: Tempered shaped glazing for permitted off-road locations.
- **Door & side glass**: Lites with hardware holes, notches and radius corners.
- **Roof & floor vision glass**: Small heavy lites for overhead and down-vision openings.
- **Tinted operator glass**: Light gray or bronze to cut glare for an operator in the sun all day. GL-20 is for a panel that is not the view out of the cab.

## Specifications

| Spec | Value |
| --- | --- |
| Glazing type | Tempered safety glazing |
| Thickness | 5/32"–5/16" (4–8 mm) by location |
| Fabrication | CNC shape cut, holes, countersinks, notches |
| Edgework | Seamed or ground per glazing method |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Standards | ANSI/SAE Z26.1-1996 · FMVSS 205 · AS-2 / AS-3 TEMP · DOT 2050 · permanent temper mark |
| Sample work | Patterns built from a broken original or template |
| Lead time | 5–10 business days after pattern approval |

## What we handle here

- **Large-format CNC cutting** Shapes, notches and radii cut from your DXF or DWG on lites up to 90" × 144".
- **DOT-approved vehicle glazing** Marked and documented automotive and recreational vehicle glass, including the legend for that opening.
- **Drilling and edgework in-house** Holes, countersinks, and seamed, ground, or polished edges, finished here before the glass ships.
- **Quotes in a day, parts in a week** Most quotes go out within one business day; production typically ships in 5–10.

## FAQ

### We only have the broken glass. Can you still make it?

Usually yes. Ship the pieces or a template; we rebuild the pattern and send a first article to check fit before running more.

### Can you supply tinted cab glass?

Light gray and Solarcool bronze are on the rack. They help on a cab with a lot of glass. Dark gray is for a panel that is not the main view.

### Do you run small quantities for a rebuild shop?

Yes, down to a single lite. Pattern work is a one-time cost, so repeat orders get cheaper.

## Related industries

- [tractors](https://www.temperededge.com/industries/tractors/index.md)
- [side-by-side](https://www.temperededge.com/industries/side-by-side/index.md)
- [specialty-vehicles](https://www.temperededge.com/industries/specialty-vehicles/index.md)
- [bus](https://www.temperededge.com/industries/bus/index.md)