# Office furniture glass: desktops, markerboards, and privacy panels

Desk tops, markerboard panels, credenza glass, and screens for contract furniture programs. Drilled for standoffs, printed where you need a colored back, and tempered to the spec.

Group: Furniture & cabinetry

Source: https://www.temperededge.com/industries/office-furniture/

## Part families

- **Desk & credenza tops**: Polished-edge tempered tops with radius corners and grommet holes.
- **Markerboard panels**: Low-iron panels with a frit-printed back for a permanent writing surface.
- **Privacy & screen panels**: Satin or frit-banded panels for desk-mounted dividers.
- **Shelf & cabinet glass**: Matching shelves and sliding cabinet lites from the same program.

## Specifications

| Spec | Value |
| --- | --- |
| Max panel size | 90" × 144" |
| Thickness | 3/16"–1/2" (5–12 mm) |
| Glass types | Clear desks from stock. A privacy screen can be light gray, or satin etch ordered at 6 mm. Markerboards are low-iron, ordered, with frit fired on the back. |
| Edgework | Flat polish, pencil edge |
| Fabrication | Standoff and grommet holes, notches, countersinks |
| Decoration | Ceramic frit, 1–2 color, full or partial coverage |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |

## What we handle here

- **Ceramic frit screen printing** Borders, blackout bands, logos and legends fired into the glass during tempering. Permanent.
- **Drilling and edgework in-house** Holes, countersinks, and seamed, ground, or polished edges, finished here before the glass ships.
- **Scheduled releases** Blanket POs with weekly pulls. We hold the released glass so your line can take it on schedule.
- **Tempering under the same roof** Cut, printed and tempered in one building, so a print revision doesn't ripple through three subcontractors.

## FAQ

### Can you make a glass markerboard?

Yes. Low-iron glass with ceramic frit fired on the back. The color is in the glass, so it does not chip the way paint does or lift the way film does.

### Do you drill for standoffs?

Yes, before tempering. Send the hole schedule with edge distances and we'll confirm they're temperable.

### Can you match a corporate color?

Frit colors are a set palette rather than an infinite match, but we'll get you the closest available and show it before the run.

## Related industries

- [dividers](https://www.temperededge.com/industries/dividers/index.md)
- [table-tops](https://www.temperededge.com/industries/table-tops/index.md)
- [display-cabinets](https://www.temperededge.com/industries/display-cabinets/index.md)
- [interior-doors](https://www.temperededge.com/industries/interior-doors/index.md)