# Tempered and insulated glass for sunrooms and enclosures

Wall, roof, and door glazing for sunroom and enclosure builders. Large tempered lites and insulated units, cut to your extrusion and held to the tolerance a glazed frame needs.

Group: Architectural & building

Source: https://www.temperededge.com/industries/sunrooms/

## Part families

- **Wall lites**: Tempered glazing to 90" × 144" cut to your frame bite.
- **Insulated units**: Dual pane with warm-edge spacer for conditioned rooms.
- **Door & transom lites**: Matching lites for entry and slider units in the same run.
- **Shaped gable glass**: Angles and trapezoids cut on the CNC from your field dimensions.

## Specifications

| Spec | Value |
| --- | --- |
| Max lite size | 90" × 144" |
| Thickness | 5/32", 3/16", 1/4" (4–6 mm) lites · IG build-up to 1" |
| Glass types | Clear on a roof. Light gray or bronze from stock on a wall that takes the sun. Obscure if a neighbor looks in. Coated glass is ordered. |
| Edgework | Seamed for glazed-in applications |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Packaging | Racked for LTL with interleaving |
| Lead time | 5–10 business days |

## What we handle here

- **Large-format CNC cutting** Shapes, notches and radii cut from your DXF or DWG on lites up to 90" × 144".
- **Insulated units assembled here** Dual pane with warm-edge spacer, built to your sightline and overall thickness.
- **Tempering under the same roof** Cut, printed and tempered in one building, so a print revision doesn't ripple through three subcontractors.
- **Scheduled releases** Blanket POs with weekly pulls. We hold the released glass so your line can take it on schedule.

## FAQ

### How large a lite can you temper?

Up to 90" × 144" in most configurations. Send the size and thickness and we'll confirm before you design around it.

### Can you cut angled gable glass from field measurements?

Yes. Give us the angles and we will cut them on the CNC. A dimensioned sketch is enough. A DXF is faster.

### Do you supply coated glass for conditioned rooms?

Yes. We source the coated glass to your spec and assemble the insulated unit here.

## Related industries

- [greenhouses](https://www.temperededge.com/industries/greenhouses/index.md)
- [window-oems](https://www.temperededge.com/industries/window-oems/index.md)
- [garage-doors](https://www.temperededge.com/industries/garage-doors/index.md)
- [dividers](https://www.temperededge.com/industries/dividers/index.md)