# Tempered glass table tops, cut and polished to your template

Table and desk tops in 1/4"–1/2" (6–12 mm), with a finished edge on every side. Rounds, ovals, rectangles with radius corners, and shapes cut from your template or DXF.

Group: Furniture & cabinetry

Source: https://www.temperededge.com/industries/table-tops/

## Part families

- **Rectangular tops**: Radius or clipped corners with flat-polished edges, tempered for safety.
- **Rounds & ovals**: True circles and ellipses cut on the CNC, polished all around.
- **Protective covers**: Thin annealed or tempered covers to protect a wood or stone surface.
- **Shaped & inset tops**: Notched, cutout or freeform tops cut from your DXF or physical template.

## Specifications

| Spec | Value |
| --- | --- |
| Max size | 90" × 144" |
| Thickness | 1/4"–1/2" (6–12 mm) typical |
| Glass types | Clear for most tops. Gray or bronze from stock up to 6 mm. Low-iron is ordered when a polished edge should not read green. Thicker than 6 mm is ordered. |
| Edgework | Flat polish, pencil edge, bevel on request |
| Corners | Square, clipped, or radius to your call-out |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Lead time | 7–12 business days |

## What we handle here

- **Drilling and edgework in-house** Holes, countersinks, and seamed, ground, or polished edges, finished here before the glass ships.
- **Large-format CNC cutting** Shapes, notches and radii cut from your DXF or DWG on lites up to 90" × 144".
- **Tempering under the same roof** Cut, printed and tempered in one building, so a print revision doesn't ripple through three subcontractors.
- **Quotes in a day, parts in a week** Most quotes go out within one business day; production typically ships in 5–10.

## FAQ

### What thickness for a dining table top?

3/8" or 1/2" for an unsupported top; 1/4" is enough as a protective cover over a solid surface. Send the span and support layout and we'll advise.

### Can you polish edges after tempering?

No. Edgework, holes, and cutouts all happen before the oven. Once the glass is tempered it cannot be recut, which is why we confirm the dimensions before we run it.

### Can you cut a hole for an umbrella?

Yes, drilled and edge-finished before tempering. Give us the diameter and center location.

## Related industries

- [residential](https://www.temperededge.com/industries/residential/index.md)
- [office-furniture](https://www.temperededge.com/industries/office-furniture/index.md)
- [furniture](https://www.temperededge.com/industries/furniture/index.md)
- [display-cabinets](https://www.temperededge.com/industries/display-cabinets/index.md)