Tempered Edge Tempered Edge GLASS FABRICATION · MICHIGAN
989-261-2925 Request a quote
FURNITURE & CABINETRY Dividers & partitions SWITCH INDUSTRY ▾ CLOSE ✕ Quotes in one business day
ARCHITECTURAL & BUILDING
FURNITURE & CABINETRY
VEHICLE GLASS (DOT)
INDUSTRIAL & EQUIPMENT
FURNITURE & CABINETRY

Glass partitions and divider panels, tempered and frit-printed

Partition glass for offices, clinics, and open offices. Full-height panels and desk screens, drilled for standoffs or sized for a channel.

  • FULL HEIGHT
  • SATIN & FRIT BANDS
  • STANDOFF HOLES
  • CHANNEL-READY
Request a quote Specs & tolerances
Dividers & partitions glass at Tempered Edge
WHAT WE MAKE

Part families we run for dividers and partitions

Full-height panels

Tempered panels to 90" × 144" with polished exposed edges.

Desk-mounted screens

Smaller panels with notches and holes for clamps and brackets.

Frit-banded panels

Printed bands at eye level for visibility marking or privacy.

Satin privacy panels

Satin substrate for translucent partitions in clinics and offices.

SPECIFICATIONS

Divider and partition glass specs

Max panel size 90" × 144"
Thickness 1/4", 5/16", 3/8", 1/2" (6–12 mm)
Glass types Clear, or light gray when the glass itself is the privacy. GL-20 dark gray reads as a wall. Satin etch is ordered. A frit band marks clear glass in a walking path.
Edgework Flat polish on exposed edges; seamed where channel-glazed
Fabrication Standoff holes, notches, cutouts before tempering
Decoration Ceramic frit bands and patterns
Size tolerance ± 1/32" on cut size; squareness within 1/16"
Standards ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark

Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.

What we handle here

  • Ceramic frit screen printing Borders, blackout bands, logos and legends fired into the glass during tempering. Permanent.
  • Drilling and edgework in-house Holes, countersinks, and seamed, ground, or polished edges, finished here before the glass ships.
  • Large-format CNC cutting Shapes, notches and radii cut from your DXF or DWG on lites up to 90" × 144".
  • Tempering under the same roof Cut, printed and tempered in one building, so a print revision doesn't ripple through three subcontractors.
SEND IT OVER

A drawing beats a phone call

DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.

Start a quote →
FAQ

Questions we get about partition glass

Missing something? Call the shop. You will reach someone who has run the furnace.

Do partition panels need to be tempered?

Yes, for any panel in a walking path. Full-height glazing is a hazardous location. Every panel we ship carries a permanent temper mark.

Can you print a visibility band?

Ceramic frit bands at any height and width, fired in during tempering. Common for code-required marking on clear panels.

How do you handle standoff hole tolerance?

Holes are cut before tempering and held tight enough to line up with a drilled bracket pattern; send the hole schedule with edge distances.

Other glass we make

All industries we serve →
Office furniture Desk tops, markerboards and privacy panels Sneeze guards & barriers Counter barriers with pass-through cutouts Interior wood & steel doors Vision panels for steel and wood doors Display cabinets Low-iron panels for retail and museum cases
DIVIDERS & PARTITIONS QUOTE

Tell us the part. We'll price it.

A short note on the part is enough for a first number. Drawings and photos welcome.

PHONE
989-261-2925
QUOTES
sales@temperededge.com
HOURS
Mon–Fri 7:00–16:30 ET
Max 24 MB. We use the file only to quote your part.