Tops & inserts
Polished tempered tops, inset panels and protective covers.
FURNITURE & CABINETRY Furniture manufacturers Quotes in one business day
ARCHITECTURAL & BUILDING
FURNITURE & CABINETRY
VEHICLE GLASS (DOT)
INDUSTRIAL & EQUIPMENT
Component glass for case goods, occasional tables, hutches, and bar units. One drawing and one shop, from the polished top down to the small mullion lite.
Polished tempered tops, inset panels and protective covers.
Fixed and adjustable shelf glass with finished edges, drilled if needed.
Clear, reeded, satin or obscure inserts cut to your rabbet.
Frit-printed backs and tinted substrates where a dark reflective panel is the design.
| Max size | 90" × 144" |
| Thickness | 1/8"–1/2" (3–12 mm) by application |
| Glass types | Clear tops and shelves. Gray or bronze when the drawing calls for a tint. Inserts that hide the inside are 3 mm obscure. Reeded and satin are ordered. |
| Edgework | Seamed, ground, flat polish, pencil, miter |
| Fabrication | Holes, notches, cutouts before tempering |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Lead time | 5–12 business days by finish |
Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.
DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.
Start a quote →Missing something? Call the shop. You will reach someone who has run the furnace.
Yes. Send a DXF, a DWG, or a dimensioned PDF. If something on it will not survive tempering, we flag it before we price the job.
Bevels are available on request; flat polish and pencil edge are our standard finished edges.
Yes. Tops, shelves, and lites can leave on one rack and one invoice.
A short note on the part is enough for a first number. Drawings and photos welcome.