Door lites, sidelites and transoms for entry and patio programs, cut and tempered to hazardous-location requirements with the obscure patterns homeowners actually ask for.
Clear, obscure or tinted, sized to your lite frame with seamed edges.
Tall narrow lites and shaped transoms cut to match the elevation.
Dual pane for exterior doors, obscure inboard lite where privacy matters.
Ceramic borders and patterns fired into the glass. They stay put, where film peels.
| Common sizes | Any size to 90" × 144" |
| Thickness | 1/8"–1/4" (3–6 mm) single · IG to 1" |
| Glass types | Clear when the lite is a view. 3 mm obscure when the entry faces the street. Gray or bronze when the door line is tinted. Rain, glue chip, and low-iron are ordered. |
| Edgework | Seamed standard · ground or polish for exposed edges |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Lead time | 5–10 business days |
Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.
DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.
Start a quote →Missing something? Call the shop. You will reach someone who has run the furnace.
Glazing in doors and within 24" of a door edge is a hazardous location under the IRC, so it requires safety glazing. All our lites are permanently marked.
Send a sample or the pattern name and we'll confirm availability before you commit a program to it.
Yes. One-offs through production runs. A measured sketch, or the dimensions off the old lite, is enough to quote.
A short note on the part is enough for a first number. Drawings and photos welcome.
