Cab door glass
Shaped lites with hinge and latch holes cut before tempering.
VEHICLE GLASS (DOT) Tractors & heavy equipment Quotes in one business day
ARCHITECTURAL & BUILDING
FURNITURE & CABINETRY
VEHICLE GLASS (DOT)
INDUSTRIAL & EQUIPMENT
Replacement and OEM cab glass for farm and construction equipment. The odd shapes, with radius corners and hardware holes, tempered and ready to glaze.
Shaped lites with hinge and latch holes cut before tempering.
Large-format shaped glazing for cab openings.
Small shaped lites, often the hardest to source for older machines.
Overhead lites for loader and boom visibility.
| Glazing type | Tempered safety glazing |
| Max lite size | 90" × 144" |
| Thickness | 5/32", 3/16", 1/4", 5/16" (4–8 mm) |
| Fabrication | CNC shape cut, holes, countersinks, notches |
| Tint options | Clear, light gray, and bronze from stock. Dark gray when the panel is not the view out. |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Standards | ANSI/SAE Z26.1-1996 · FMVSS 205 · AS-2 / AS-3 TEMP · DOT 2050 · permanent temper mark |
| Sample work | Pattern built from your template, drawing or broken lite |
Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.
DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.
Start a quote →Missing something? Call the shop. You will reach someone who has run the furnace.
That's a lot of what we do. With a template or the old pieces we build the pattern and can rerun it any time you need another.
Accurate enough that the hole centers and the perimeter are right. Cardboard is fine. If something looks off, we will flag it before we cut.
Yes, kitted by machine and racked so nothing arrives loose.
A short note on the part is enough for a first number. Drawings and photos welcome.