DOT-approved glass for specialty vehicle builders

Glazing for low-volume and custom builds: RVs, motorhomes, work trucks, and mobile units. DOT-approved, frit-printed with your marking, and cut from your template or from the old lite.

DOT APPROVED
FRIT-PRINTED MARKS
CNC-CUT SHAPES
LOW VOLUME OK

Request a quote Specs & tolerances

Specialty vehicles glass at Tempered Edge

WHAT WE MAKE

Part families we run for specialty vehicle builders

Fixed window lites

Curved-perimeter shapes cut on the CNC, tempered and DOT-marked.

Door & hatch glass

Lites with holes and notches for hardware, cut before tempering.

Frit-printed borders

Blackout bands for adhesive bonding plus the required DOT legend.

Tinted privacy glass

Factory tint for living quarters: light gray when you still want the view, GL-20 dark gray over a bunk, bronze to match the coach.

SPECIFICATIONS

Specialty vehicle glass specs

Glazing type	Tempered safety glazing (AS-2 / AS-3 locations)
Max lite size	90" × 144"
Thickness	1/8"–1/4" (3–6 mm) typical
Marking	Screen-printed DOT legend and manufacturer identification
Fabrication	CNC shape cut, holes, notches, countersinks
Size tolerance	± 1/32" on cut size; squareness within 1/16"
Standards	ANSI/SAE Z26.1-1996 · FMVSS 205 · AS-2 / AS-3 TEMP · DOT 2050 · permanent temper mark
Lead time	5–10 business days after pattern approval

Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.

What we handle here

DOT-approved vehicle glazing Marked and documented automotive and recreational vehicle glass, including the legend for that opening.
Ceramic frit screen printing Borders, blackout bands, logos and legends fired into the glass during tempering. Permanent.
Large-format CNC cutting Shapes, notches and radii cut from your DXF or DWG on lites up to 90" × 144".
Quotes in a day, parts in a week Most quotes go out within one business day; production typically ships in 5–10.

SEND IT OVER

A drawing beats a phone call

DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.

Start a quote →

FAQ

Questions we get about specialty vehicle glass

Missing something? Call the shop. You will reach someone who has run the furnace.

What does your DOT approval cover?

We hold DOT approval for automotive and recreational vehicle glass and mark parts with the required legend. Tell us the glazing location and we'll confirm the right specification for it.