Repeat-size glass for flat-pack programs. The same panel, run in volume, packed the way your carton line needs it and released on a schedule.
Repeat-size tempered panels held to tight tolerance for automated assembly.
Shelf glass with pin or bracket holes cut before tempering.
Frit-printed borders or full-coverage backs in place of paint.
Sliding and hinged door glass sized to your extrusion or channel.
| Glass on hand | Clear, green, gray, or bronze in the thickness the program locked. Satin and low-iron are ordered. |
| Volumes | Production runs; blanket POs with weekly releases |
| Thickness | 1/8"–5/16" (3–8 mm) typical |
| Edgework | Seamed or ground; polished where the edge is exposed in the carton |
| Fabrication | Repeatable hole patterns from a fixed program |
| Packaging | Interleaved, boxed or foam-separated to suit your carton line |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Lead time | Scheduled. Usually pulled weekly from released stock |
Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.
DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.
Start a quote →Missing something? Call the shop. You will reach someone who has run the furnace.
Tell us how the glass should show up at the packing station: interleaved stacks, boxed sets, or separated with foam. We pack it that way.
± 1/32" on cut size with squareness inside 1/16". For automated assembly we'll run a first article for sign-off before the program starts.
Yes, agreed as a percentage up front so a broken panel doesn't hold a carton.
A short note on the part is enough for a first number. Drawings and photos welcome.
