Single-lite and dual-pane inserts for sectional and carriage-house doors. We cut, edge, frit-print, and temper them in one building, then ship to your line on the schedule you set.
1/8"–1/4" (3–6 mm) clear, obscure or tinted, seamed or ground edge, sized to your retainer profile.
Dual pane with warm-edge spacer for insulated door series; coated or obscure inboard lite.
Black or white ceramic bands that hide sealant and retainers, fired in during tempering.
CNC-cut arches, eyebrows and custom radii for carriage-house and specialty panels.
| Common lite sizes | Any size to 90" × 144"; typical 12"×20" to 24"×36" |
| Thickness | 1/8", 5/32", 3/16", 1/4" (3–6 mm) single · 1/2"–1" IG build-up |
| Glass types | Clear, light gray, dark gray (GL-20), green, or bronze from the rack. Privacy lites are the 3 mm obscure we keep. Rain, glue chip, satin, and low-iron are ordered. |
| Edgework | Seamed standard · ground or flat polish on request |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
| Packaging | Interleaved on returnable racks or crated for LTL |
| Lead time | 5–10 business days · scheduled releases on blanket POs |
Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.
DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.
Start a quote →Missing something? Call the shop. You will reach someone who has run the furnace.
Yes. Dual pane with a warm-edge spacer. We can pair an obscure or coated inboard lite with a clear outboard lite. Overall thickness is built to your retainer opening.
That's ceramic frit screen printing, done on site and fired during tempering. It won't peel, fade or chalk like an applied film.
Glazing in and adjacent to doors is a hazardous location under the IRC, so safety glazing is required. Every lite carries a permanent temper mark and meets ANSI Z97.1-2015 Class A and CPSC 16 CFR 1201 Category II.
Standard sizes in stock thicknesses usually ship within the week. Send the pattern number or a measured sketch and we'll confirm the same day.
A short note on the part is enough for a first number. Drawings and photos welcome.
