Counter barriers and food guards in tempered glass. Polished on every exposed edge, cut with a pass-through where you need one, and drilled for the bracket or standoff you are using.
Flat tempered panels with polished edges and radius corners.
Panels with a CNC-cut transaction opening, edges finished.
Drilled for standoffs, clamps or post systems.
Printed bands so people see the glass before they walk into it.
| Sizes | Any size to 90" × 144" |
| Thickness | 1/4", 5/16", 3/8" (6–10 mm) typical |
| Glass types | Clear, so people can see the food. We tint a guard only if you ask. |
| Edgework | Flat polish standard; pencil edge on request |
| Fabrication | Cutouts, standoff holes, radius corners |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | ANSI Z97.1-2015 Class A · 16 CFR 1201 Category II (400 ft-lb) · permanent temper mark |
Need a spec not listed? We quote off your drawing. Colors we usually keep on hand.
DXF, DWG, PDF, a dimensioned sketch, or a photo of the part. We check holes and edge distances against the tempering limits before we price it, so the number is for a part we can actually make.
Start a quote →Missing something? Call the shop. You will reach someone who has run the furnace.
Acrylic scratches, yellows and clouds with disinfectant. Tempered glass cleans indefinitely and looks like part of the fixture rather than a temporary measure.
Yes, on the CNC with the opening edges finished, before tempering.
5/16" or 3/8" depending on height and how it's supported. Send the layout and we'll recommend one.
A short note on the part is enough for a first number. Drawings and photos welcome.
